slab leveling solutions in San Diego, CA

Home > Service Area > Irvine > Concrete Leveling

Concrete Lifting and Leveling in Irvine, California

Concrete is not a light material so when anything from changes in a soil's moisture level to poor compaction weaken the soil under your concrete slab, it will sink. And when your concrete slab sinks, especially if it sinks unevenly, it will strain the concrete possibly past its breaking point, causing unsightly and potentially dangerous cracks and gaps in the seams. If the slab in question happens to be your home's foundation, it could cause a whole host of other foundation problems. That is where slab leveling comes in.

Using an expanding polyurethane foam, we can level your concrete slab. The foam raises the portions that have sunk while simultaneously compacting the soil underneath, providing a permanent solution. The best part: it doesn't involve tearing up your current slab.

Foundations on the Level is your number one slab leveling contractor in Irvine. We have the knowledge, equipment, and experience to raise and level your uneven or cracked concrete slab. Contact us today to schedule an appointment for a free estimate.



Where Can Polyurethane Foam Concrete Leveling Be Used?

Concrete slabs are all around us. We walk on them, drive on them, and play on them. Our homes and garages are built on them. And if there is a concrete slab that is sinking, chances are we can level it with polyurethane foam.

Concrete slabs that we can level include:

  • Driveways
  • Home Foundation Slabs
  • Garage Slabs
  • Steps
  • Pool Decks
  • Roads
  • Parking Lots
  • Patios
  • Sidewalks

Slab leveling with foam raises a sunken slab

How Concrete Leveling with Foam Works

If we determine, after inspecting your property for free, that polymer foam is the best solution, the process will be completed quickly, with little disruption to your property.

We drill small holes into the concrete and inject the foam through them. The foam spreads out, filling any voids below the slab and compressing any loose soil supporting the concrete.

The foam is impervious to any water or chemicals found in the soil, so it won't break down over time. This makes it a permanent solution. The slab is then lifted to within a fraction of inch of the desired height.

Once the slab is at the desired height, the equipment is removed and the holes are filled. You also won't have to wait. The foam takes around 15 minutes to cure, so once everything is cleaned up, you can use the concrete surface like normal.

Benefits of Slab Leveling

When your slab starts to sink, you have two options: Fix the underlying problem or wait until the entire slab needs to be replaced.

In this case, the permanent solution is also the less invasive one.

First, the polyurethane injection process is minimally invasive. We fill the small holes in the slab, and the area around the slab remains undisturbed. You can not say the same thing for replacing the slab, with the necessity to break up and remove the old concrete.

Second, the process is quick. Most slabs can be leveled quickly, with even the larger ones rarely taking more than a day. And as mentioned earlier, they can be used almost immediately, without waiting for an entire slab of new concrete to cure.

The reduced time and materials also make it the more affordable option, especially when you look long term.

That is because if you simply lay another concrete slab over the same unsupported soil, there is a good chance you will be dealing with more problems as the new slab sinks as well. With polyurethane foam, the compaction strengthens the soil, providing a solution to the underlying issue rather than fixing the surface cracks with a new slab.

Read more about the benefits of polyurethane foam.

Accella Polyurethane Systems: The Best in the Industry

In today's industry, one of the leading solutions for concrete leveling and repair is polymer foam. Here at Foundations on the Level, we use Accella Polyurethane Systems for their Low Density Water Blown Spray Foam (SR230-4. SR230-4).

This foam spray is developed to meet all slab raising needs while replacing existing blowing agents with zero ozone-depleting solvents. Accella has overcome a major industry problem by creating this highly stable water blown spray foam. These are the physical properties of the foam Foundations on the Level trusts:

accella polyurethane system for slab leveling

  • Density: 4lbs per cubic foot
  • Dimensional stability: 3 days at 150°F, 2.2% change in volume. 7 days at 150°F, 2.2% change in volume
  • Compressive strength: 95psi
  • Viscosity at 76°F: A side, 300 cps. B side, 700 cps
  • Ratio: 1/1 by volume
  • Reactivity at 120°F: 5-7 seconds rise time

Need to Find a Concrete Leveling Contractor Near You in Irvine? Contact Us Today

The team at Foundations on the Level has the knowledge and tools to fix your slab and raise it back to its original position. No matter what area of your home is affected, we can permanently level and stabilize your concrete slab. We offer a free inspection and report for property owners so you can be confident in our expertise and know that our methods will fix your cracked foundation slab or an uneven sidewalk. Protect the investment you have in your home or business with our concrete slab repair services. Check out the video below to see how slab raising works with polymer foam.

Click here for your free foundation report and C.A.D. plan. (Only free for property owners).